Sub-Station Structures

A List of the types of the supporting structures :
● Lightening Arrestor.
● Post Insulator.
● Beam.
● Current Transformers.
● Power Transformers.
Substation structures like transformers, lightning arrestor, beams etc are always out in the open surroundings and they can easily get corroded with wear and tear. In order to protect them galvanization is absolutely essential. We hold the expertise in galvanizing all kinds of substation structures at minimal possible costs. We finish all the work on promised deadlines and quality standards are purely top notch. Switchyard Structure is generally applied for the assembly of switches, power circuit breakers,
buses and auxiliary equipment, which are used to collect power from the generators of power plant and distribute to the transmission line at a load point. As far as structures are concerned the terms, Sub-Station and Switchyard structures will be used interchangeably Transmission lines are power lines typically with voltage at 66KV and above. Voltage than 66KV are usually referred to as distribution lines. Transmission Line Sub-Station Structures are to be used for protection of Sub-Station equipments. Shield wires may also used for communications.
Electrical clearances provide physical separation needed for phase to phase, Phase to Structure and phase to ground air gap to provide safe working areas and to prevent flashover.

Raw-materials of our products :
Generally we use M.S. Sheets, Structural Forms viz. Angles, Channels, Beam,
Plates, Flats, Rounds…etc. Zinc, Primers & Paints. All these we purchased from the reputed manufacturers/traders with required Test Certificates.

Finish:
Generally we supply our products with the finish of Hot Dip Galvanized.

Utility:
Our products are used by Power Plants, Cooling Towers Manufacturers, Railways, Refinery Projects, Fertilizer Industries, Cement Factories, Petrochemical Projects and Large Scale of Industrial Units.
Galvanizing of Sub Station Structure
Substation structures like transformers, lightning arrestor, beams etc are always out in the open surroundings and they can easily get corroded with wear and tear. In order to protect them galvanization is absolutely essential. We hold the expertise in galvanizing all kinds of substation structures at minimal possible costs. We finish all the work on promised deadlines and quality tandards are purely top notch.